instance of libp2p
If router can relay received messages, even if not subscribed
if publish should emit to self, if subscribed
The signature policy to follow by default
Map of peer streams
Cache of seen messages
List of our subscriptions
Topic validator map
Keyed by topic Topic validators are functions with the following input:
Map of topics to which peers are subscribed to
Sets or gets the default captureRejection value for all emitters.
This symbol shall be used to install a listener for only monitoring 'error'
events. Listeners installed using this symbol are called before the regular
'error' listeners are called.
Installing a listener using this symbol does not change the behavior once an
'error' event is emitted, therefore the process will still crash if no
regular 'error' listener is installed.
Whether to accept a message from a peer Override to create a graylist
Notifies the router that a peer has been connected
Normalizes the message and signs it, if signing is enabled. Should be used by the routers to create the message to send.
Decode Uint8Array into an RPC object. This can be override to use a custom router protobuf.
Emit a message from a peer
Encode RPC object into a Uint8Array. This can be override to use a custom router protobuf.
Forward message to peers.
On an inbound stream opened.
Registrar notifies an established connection with pubsub protocol.
remote peer-id
connection to the peer
Registrar notifies a closing connection with pubsub protocol.
peerId
Responsible for processing each RPC message received by other peers.
peer id string in base58
inbound stream
PubSub peer
Handles an rpc request from a peer
Process incoming message Extends base implementation to check router cache.
The message to process
Handles a subscription change from a peer
Publish message created. Forward it to the peers.
Notifies the router that a peer has been disconnected.
Send an rpc object to a peer
peer id
Send subscroptions to a peer
peer id
set to false for unsubscriptions
Alias for emitter.on(eventName, listener).
Synchronously calls each of the listeners registered for the event namedeventName, in the order they were registered, passing the supplied arguments
to each.
Returns true if the event had listeners, false otherwise.
const EventEmitter = require('events');
const myEmitter = new EventEmitter();
// First listener
myEmitter.on('event', function firstListener() {
console.log('Helloooo! first listener');
});
// Second listener
myEmitter.on('event', function secondListener(arg1, arg2) {
console.log(`event with parameters ${arg1}, ${arg2} in second listener`);
});
// Third listener
myEmitter.on('event', function thirdListener(...args) {
const parameters = args.join(', ');
console.log(`event with parameters ${parameters} in third listener`);
});
console.log(myEmitter.listeners('event'));
myEmitter.emit('event', 1, 2, 3, 4, 5);
// Prints:
// [
// [Function: firstListener],
// [Function: secondListener],
// [Function: thirdListener]
// ]
// Helloooo! first listener
// event with parameters 1, 2 in second listener
// event with parameters 1, 2, 3, 4, 5 in third listener
Returns an array listing the events for which the emitter has registered
listeners. The values in the array are strings or Symbols.
const EventEmitter = require('events');
const myEE = new EventEmitter();
myEE.on('foo', () => {});
myEE.on('bar', () => {});
const sym = Symbol('symbol');
myEE.on(sym, () => {});
console.log(myEE.eventNames());
// Prints: [ 'foo', 'bar', Symbol(symbol) ]
Returns the current max listener value for the EventEmitter which is either
set by emitter.setMaxListeners(n) or defaults to defaultMaxListeners.
The default msgID implementation Child class can override this.
the message object
message id as bytes
Get a list of the peer-ids that are subscribed to one topic.
Get the list of topics which the peer is subscribed to.
Returns the number of listeners listening to the event named eventName.
The name of the event being listened for
Returns a copy of the array of listeners for the event named eventName.
server.on('connection', (stream) => {
console.log('someone connected!');
});
console.log(util.inspect(server.listeners('connection')));
// Prints: [ [Function] ]
Alias for emitter.removeListener().
Adds the listener function to the end of the listeners array for the
event named eventName. No checks are made to see if the listener has
already been added. Multiple calls passing the same combination of eventNameand listener will result in the listener being added, and called, multiple
times.
server.on('connection', (stream) => {
console.log('someone connected!');
});
Returns a reference to the EventEmitter, so that calls can be chained.
By default, event listeners are invoked in the order they are added. Theemitter.prependListener() method can be used as an alternative to add the
event listener to the beginning of the listeners array.
const myEE = new EventEmitter();
myEE.on('foo', () => console.log('a'));
myEE.prependListener('foo', () => console.log('b'));
myEE.emit('foo');
// Prints:
// b
// a
The name of the event.
The callback function
Adds a one-timelistener function for the event named eventName. The
next time eventName is triggered, this listener is removed and then invoked.
server.once('connection', (stream) => {
console.log('Ah, we have our first user!');
});
Returns a reference to the EventEmitter, so that calls can be chained.
By default, event listeners are invoked in the order they are added. Theemitter.prependOnceListener() method can be used as an alternative to add the
event listener to the beginning of the listeners array.
const myEE = new EventEmitter();
myEE.once('foo', () => console.log('a'));
myEE.prependOnceListener('foo', () => console.log('b'));
myEE.emit('foo');
// Prints:
// b
// a
The name of the event.
The callback function
Adds the listener function to the beginning of the listeners array for the
event named eventName. No checks are made to see if the listener has
already been added. Multiple calls passing the same combination of eventNameand listener will result in the listener being added, and called, multiple
times.
server.prependListener('connection', (stream) => {
console.log('someone connected!');
});
Returns a reference to the EventEmitter, so that calls can be chained.
The name of the event.
The callback function
Adds a one-timelistener function for the event named eventName to the_beginning_ of the listeners array. The next time eventName is triggered, this
listener is removed, and then invoked.
server.prependOnceListener('connection', (stream) => {
console.log('Ah, we have our first user!');
});
Returns a reference to the EventEmitter, so that calls can be chained.
The name of the event.
The callback function
Publishes messages to all subscribed peers
Returns a copy of the array of listeners for the event named eventName,
including any wrappers (such as those created by .once()).
const emitter = new EventEmitter();
emitter.once('log', () => console.log('log once'));
// Returns a new Array with a function `onceWrapper` which has a property
// `listener` which contains the original listener bound above
const listeners = emitter.rawListeners('log');
const logFnWrapper = listeners[0];
// Logs "log once" to the console and does not unbind the `once` event
logFnWrapper.listener();
// Logs "log once" to the console and removes the listener
logFnWrapper();
emitter.on('log', () => console.log('log persistently'));
// Will return a new Array with a single function bound by `.on()` above
const newListeners = emitter.rawListeners('log');
// Logs "log persistently" twice
newListeners[0]();
emitter.emit('log');
Removes all listeners, or those of the specified eventName.
It is bad practice to remove listeners added elsewhere in the code,
particularly when the EventEmitter instance was created by some other
component or module (e.g. sockets or file streams).
Returns a reference to the EventEmitter, so that calls can be chained.
Removes the specified listener from the listener array for the event namedeventName.
const callback = (stream) => {
console.log('someone connected!');
};
server.on('connection', callback);
// ...
server.removeListener('connection', callback);
removeListener() will remove, at most, one instance of a listener from the
listener array. If any single listener has been added multiple times to the
listener array for the specified eventName, then removeListener() must be
called multiple times to remove each instance.
Once an event is emitted, all listeners attached to it at the
time of emitting are called in order. This implies that anyremoveListener() or removeAllListeners() calls after emitting and_before_ the last listener finishes execution will
not remove them fromemit() in progress. Subsequent events behave as expected.
const myEmitter = new MyEmitter();
const callbackA = () => {
console.log('A');
myEmitter.removeListener('event', callbackB);
};
const callbackB = () => {
console.log('B');
};
myEmitter.on('event', callbackA);
myEmitter.on('event', callbackB);
// callbackA removes listener callbackB but it will still be called.
// Internal listener array at time of emit [callbackA, callbackB]
myEmitter.emit('event');
// Prints:
// A
// B
// callbackB is now removed.
// Internal listener array [callbackA]
myEmitter.emit('event');
// Prints:
// A
Because listeners are managed using an internal array, calling this will
change the position indices of any listener registered after the listener
being removed. This will not impact the order in which listeners are called,
but it means that any copies of the listener array as returned by
the emitter.listeners() method will need to be recreated.
When a single function has been added as a handler multiple times for a single
event (as in the example below), removeListener() will remove the most
recently added instance. In the example the once('ping')listener is removed:
const ee = new EventEmitter();
function pong() {
console.log('pong');
}
ee.on('ping', pong);
ee.once('ping', pong);
ee.removeListener('ping', pong);
ee.emit('ping');
ee.emit('ping');
Returns a reference to the EventEmitter, so that calls can be chained.
By default EventEmitters will print a warning if more than 10 listeners are
added for a particular event. This is a useful default that helps finding
memory leaks. The emitter.setMaxListeners() method allows the limit to be
modified for this specific EventEmitter instance. The value can be set toInfinity (or 0) to indicate an unlimited number of listeners.
Returns a reference to the EventEmitter, so that calls can be chained.
Register the pubsub protocol onto the libp2p node
Unregister the pubsub protocol and the streams with other peers will be closed.
Subscribes to a given topic.
Unsubscribe from the given topic.
Validates the given message. The signature will be checked for authenticity. Throws an error on invalid messages
Returns a copy of the array of listeners for the event named eventName.
For EventEmitters this behaves exactly the same as calling .listeners on
the emitter.
For EventTargets this is the only way to get the event listeners for the
event target. This is useful for debugging and diagnostic purposes.
const { getEventListeners, EventEmitter } = require('events');
{
const ee = new EventEmitter();
const listener = () => console.log('Events are fun');
ee.on('foo', listener);
getEventListeners(ee, 'foo'); // [listener]
}
{
const et = new EventTarget();
const listener = () => console.log('Events are fun');
et.addEventListener('foo', listener);
getEventListeners(et, 'foo'); // [listener]
}
A class method that returns the number of listeners for the given eventNameregistered on the given emitter.
const { EventEmitter, listenerCount } = require('events');
const myEmitter = new EventEmitter();
myEmitter.on('event', () => {});
myEmitter.on('event', () => {});
console.log(listenerCount(myEmitter, 'event'));
// Prints: 2
The emitter to query
The event name
```js const { on, EventEmitter } = require('events');
(async () => { const ee = new EventEmitter();
// Emit later on process.nextTick(() => { ee.emit('foo', 'bar'); ee.emit('foo', 42); });
for await (const event of on(ee, 'foo')) { // The execution of this inner block is synchronous and it // processes one event at a time (even with await). Do not use // if concurrent execution is required. console.log(event); // prints ['bar'] [42] } // Unreachable here })();
Returns an `AsyncIterator` that iterates `eventName` events. It will throw
if the `EventEmitter` emits `'error'`. It removes all listeners when
exiting the loop. The `value` returned by each iteration is an array
composed of the emitted event arguments.
An `AbortSignal` can be used to cancel waiting on events:
```js
const { on, EventEmitter } = require('events');
const ac = new AbortController();
(async () => {
const ee = new EventEmitter();
// Emit later on
process.nextTick(() => {
ee.emit('foo', 'bar');
ee.emit('foo', 42);
});
for await (const event of on(ee, 'foo', { signal: ac.signal })) {
// The execution of this inner block is synchronous and it
// processes one event at a time (even with await). Do not use
// if concurrent execution is required.
console.log(event); // prints ['bar'] [42]
}
// Unreachable here
})();
process.nextTick(() => ac.abort());
The name of the event being listened for
that iterates eventName events emitted by the emitter
Creates a Promise that is fulfilled when the EventEmitter emits the given
event or that is rejected if the EventEmitter emits 'error' while waiting.
The Promise will resolve with an array of all the arguments emitted to the
given event.
This method is intentionally generic and works with the web platform EventTarget interface, which has no special'error' event
semantics and does not listen to the 'error' event.
const { once, EventEmitter } = require('events');
async function run() {
const ee = new EventEmitter();
process.nextTick(() => {
ee.emit('myevent', 42);
});
const [value] = await once(ee, 'myevent');
console.log(value);
const err = new Error('kaboom');
process.nextTick(() => {
ee.emit('error', err);
});
try {
await once(ee, 'myevent');
} catch (err) {
console.log('error happened', err);
}
}
run();
The special handling of the 'error' event is only used when events.once()is used to wait for another event. If events.once() is used to wait for the
'error' event itself, then it is treated as any other kind of event without
special handling:
const { EventEmitter, once } = require('events');
const ee = new EventEmitter();
once(ee, 'error')
.then(([err]) => console.log('ok', err.message))
.catch((err) => console.log('error', err.message));
ee.emit('error', new Error('boom'));
// Prints: ok boom
An AbortSignal can be used to cancel waiting for the event:
const { EventEmitter, once } = require('events');
const ee = new EventEmitter();
const ac = new AbortController();
async function foo(emitter, event, signal) {
try {
await once(emitter, event, { signal });
console.log('event emitted!');
} catch (error) {
if (error.name === 'AbortError') {
console.error('Waiting for the event was canceled!');
} else {
console.error('There was an error', error.message);
}
}
}
foo(ee, 'foo', ac.signal);
ac.abort(); // Abort waiting for the event
ee.emit('foo'); // Prints: Waiting for the event was canceled!
FloodSub (aka dumbsub is an implementation of pubsub focused on delivering an API for Publish/Subscribe, but with no CastTree Forming (it just floods the network).